Accessories for enclosures
C2306917
Pressure equalisation element M6x0.75
Pressure equalisation elements with highly improved air exchange for protecting sensitive electronics. Changing atmospheric conditions and a sudden decrease in temperature can cause underpressure inside protective housings of technical equipment. Water and dirt can penetrate the gaskets damaging electronics in the process. The patented IQ TEX® technology is the ideal solution for urgent pressure balancing in large control cabinets and all protective housings. At the same time the innovative construction of IQ TEX® protects against foreign material and dirt. If required, it is absolutely watertight up to a pressure of 6 bar.
Airflow: 6.5 L/min - 0.25 bar; 16.5 L/min - 1 bar.
Water entry pressure: > 6 bar.
Temperature range: -40°C/+110°C.
Sealing material: BASF Luquafleece + PA6 mesh (insert molding).
1 pressure equalisation element, 1 seal washer, 1 nut
Generate Your PDF Datasheet for C2306917
Please select the product details you would like to include in the PDF.
Add to my basket 
C0080801
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0080801
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
80x80x20mm
C0080802
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0080802
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
80x80x20mm
C0081201
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0081201
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
120x80x20mm
C0081202
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0081202
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
120x80x20mm
C0081601
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0081601
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
160x80x20mm
C0081602
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0081602
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
160x80x20mm
C0082401
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0082401
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
240x80x20mm
C0082402
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C0082402
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
240x80x20mm
C0121201
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0121201
Case shell 120, with tongueproduct added to your list
light grey RAL 7035
120x120x30mm
C0121202
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0121202
Case shell 120, with tongueproduct added to your list
light grey RAL 7035
120x120x30mm
C0122001
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0122001
Case shell 120, with tongueproduct added to your list
light grey RAL 7035
200x120x30mm
C0122002
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0122002
Case shell 120, with tongueproduct added to your list
light grey RAL 7035
200x120x30mm
C0122401
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0122401
Case shell 120, with tongueproduct added to your list
light grey RAL 7035
240x120x30mm
C0122402
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0122402
Case shell 120, with tongueproduct added to your list
light grey RAL 7035
240x120x30mm
C0161601
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0161601
Case shell 160, with tongueproduct added to your list
light grey RAL 7035
160x160x30mm
C0161602
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0161602
Case shell 160, with tongueproduct added to your list
light grey RAL 7035
160x160x30mm
C0162401
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0162401
Case shell 160, with tongueproduct added to your list
light grey RAL 7035
240x160x30mm
C0162402
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part.´Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C0162402
Case shell 160, with tongueproduct added to your list
light grey RAL 7035
240x160x30mm
C1080801
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1080801
Case shell 80, with tongueproduct added to your list
light grey RAL 7035
80x80x40mm
C1080802
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1080802
Case shell 80, with tongueproduct added to your list
light grey RAL 7035
80x80x40mm
C1081201
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1081201
Case shell 80, with tongueproduct added to your list
light grey RAL 7035
120x80x40mm
C1081202
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1081202
Case shell 80, with tongueproduct added to your list
light grey RAL 7035
120x80x40mm
C1081601
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1081601
Case shell 80, with tongueproduct added to your list
light grey RAL 7035
160x80x40mm
C1081602
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1081602
Case shell 80, with tongueproduct added to your list
light grey RAL 7035
160x80x40mm
C1082401
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1082401
Case shell 80, with tongueproduct added to your list
light grey RAL 7035
240x80x40mm
C1082402
Case shell 80, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1082402
Case shell 80, with tongueproduct added to your list
light grey RAL 7035
240x80x40mm
C1121201
Case shell 120, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1121201
Case shell 120, with grooveproduct added to your list
light grey RAL 7035
120x120x30mm
C1121202
Case shell 120, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1121202
Case shell 120, with grooveproduct added to your list
light grey RAL 7035
120x120x30mm
C1122001
Case shell 120, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1122001
Case shell 120, with grooveproduct added to your list
light grey RAL 7035
200x120x30mm
C1122002
Case shell 120, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1122002
Case shell 120, with grooveproduct added to your list
light grey RAL 7035
200x120x30mm
C1122401
Case shell 120, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1122401
Case shell 120, with grooveproduct added to your list
light grey RAL 7035
240x120x30mm
C1122402
Case shell 120, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1122402
Case shell 120, with grooveproduct added to your list
light grey RAL 7035
240x120x30mm
C1161601
Case shell 160, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1161601
Case shell 160, with grooveproduct added to your list
light grey RAL 7035
160x160x30mm
C1161602
Case shell 160, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1161602
Case shell 160, with grooveproduct added to your list
light grey RAL 7035
160x160x30mm
C1162401
Case shell 160, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1162401
Case shell 160, with grooveproduct added to your list
light grey RAL 7035
240x160x30mm
C1162402
Case shell 160, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C1162402
Case shell 160, with grooveproduct added to your list
light grey RAL 7035
240x160x30mm
C1203001
Case shell 200, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1203001
Case shell 200, with tongueproduct added to your list
light grey RAL 7035
300x200x40mm
C1243601
Case shell 240, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C1243601
Case shell 240, with tongueproduct added to your list
light grey RAL 7035
360x240x40mm
C2008081
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealeing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008081
ROBUST-BOX WIDTH 80, Vers. Iproduct added to your list
light grey RAL 7035
80x80x60mm
C2008082
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008082
ROBUST-BOX WIDTH 80, Vers. IIproduct added to your list
light grey RAL 7035
80x80x60mm
C2008121
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008121
ROBUST-BOX WIDTH 80, Vers. Iproduct added to your list
light grey RAL 7035
120x80x60mm
C2008122
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008122
ROBUST-BOX WIDTH 80, Vers. IIproduct added to your list
light grey RAL 7035
120x80x60mm
C2008161
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008161
ROBUST-BOX WIDTH 80, Vers. Iproduct added to your list
light grey RAL 7035
160x80x60mm
C2008162
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008162
ROBUST-BOX WIDTH 80, Vers. IIproduct added to your list
light grey RAL 7035
160x80x60mm
C2008241
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008241
ROBUST-BOX WIDTH 80, Vers. Iproduct added to your list
light grey RAL 7035
240x80x60mm
C2008242
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2008242
ROBUST-BOX WIDTH 80, Vers. IIproduct added to your list
light grey RAL 7035
240x80x60mm
C2012121
ROBUST-BOX WIDTH 120, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2012121
ROBUST-BOX WIDTH 120, Vers. Iproduct added to your list
light grey RAL 7035
120x120x60mm
C2012122
ROBUST-BOX WIDTH 120, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2012122
ROBUST-BOX WIDTH 120, Vers. IIproduct added to your list
light grey RAL 7035
120x120x60mm
C2012201
ROBUST-BOX WIDTH 120, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2012201
ROBUST-BOX WIDTH 120, Vers. Iproduct added to your list
light grey RAL 7035
200x120x60mm
C2012202
ROBUST-BOX WIDTH 120, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2012202
ROBUST-BOX WIDTH 120, Vers. IIproduct added to your list
light grey RAL 7035
200x120x60mm
C2012241
ROBUST-BOX WIDTH 120, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2012241
ROBUST-BOX WIDTH 120, Vers. Iproduct added to your list
light grey RAL 7035
240x120x60mm
C2012242
ROBUST-BOX WIDTH 120, Vers, II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2012242
ROBUST-BOX WIDTH 120, Vers, IIproduct added to your list
light grey RAL 7035
240x120x60mm
C2016161
ROBUST-BOX WIDTH 160, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2016161
ROBUST-BOX WIDTH 160, Vers. Iproduct added to your list
light grey RAL 7035
160x160x60mm
C2016162
ROBUST-BOX WIDTH 160, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2016162
ROBUST-BOX WIDTH 160, Vers. IIproduct added to your list
light grey RAL 7035
160x160x60mm
C2016241
ROBUST-BOX WIDTH 160, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2016241
ROBUST-BOX WIDTH 160, Vers. Iproduct added to your list
light grey RAL 7035
240x160x60mm
C2016242
ROBUST-BOX WIDTH 160, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2016242
ROBUST-BOX WIDTH 160, Vers. IIproduct added to your list
light grey RAL 7035
240x160x60mm
C2080801
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2080801
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
80x80x40mm
C2080802
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2080802
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
80x80x40mm
C2081201
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2081201
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
120x80x40mm
C2081202
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2081202
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
120x80x40mm
C2081601
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2081601
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
160x80x40mm
C2081602
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2081602
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
160x80x40mm
C2082401
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2082401
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
240x80x40mm
C2082402
Case shell 80, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2082402
Case shell 80, with grooveproduct added to your list
light grey RAL 7035
240x80x40mm
C2108081
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and botttom, assembly kit
C2108081
ROBUST-BOX WIDTH 80, Vers. Iproduct added to your list
light grey RAL 7035
80x80x80mm
C2108082
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108082
ROBUST-BOX WIDTH 80, Vers. IIproduct added to your list
light grey RAL 7035
80x80x80mm
C2108121
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108121
ROBUST-BOX WIDTH 80, Vers. Iproduct added to your list
light grey RAL 7035
120x80x80mm
C2108122
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108122
ROBUST-BOX WIDTH 80, Vers. IIproduct added to your list
light grey RAL 7035
120x80x80mm
C2108161
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108161
ROBUST-BOX WIDTH 80, Vers. Iproduct added to your list
light grey RAL 7035
160x80x80mm
C2108162
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108162
ROBUST-BOX WIDTH 80, Vers. IIproduct added to your list
light grey RAL 7035
160x80x80mm
C2108241
ROBUST-BOX WIDTH 80, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108241
ROBUST-BOX WIDTH 80, Vers. Iproduct added to your list
light grey RAL 7035
240x80x80mm
C2108242
ROBUST-BOX WIDTH 80, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2108242
ROBUST-BOX WIDTH 80, Vers. IIproduct added to your list
light grey RAL 7035
240x80x80mm
C2112121
ROBUST-BOX WIDTH 120, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2112121
ROBUST-BOX WIDTH 120, Vers. Iproduct added to your list
light grey RAL 7035
120x120x90mm
C2112122
ROBUST-BOX WIDTH 120, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2112122
ROBUST-BOX WIDTH 120, Vers. IIproduct added to your list
light grey RAL 7035
120x120x90mm
C2112201
ROBUST-BOX WIDTH 120, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2112201
ROBUST-BOX WIDTH 120, Vers. Iproduct added to your list
light grey RAL 7035
200x120x90mm
C2112202
ROBUST-BOX WIDTH 120, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2112202
ROBUST-BOX WIDTH 120, Vers. IIproduct added to your list
light grey RAL 7035
200x120x90mm
C2112241
ROBUST-BOX WIDTH 120, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2112241
ROBUST-BOX WIDTH 120, Vers. Iproduct added to your list
light grey RAL 7035
240x120x90mm
C2112242
ROBUST-BOX WIDTH 120, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2112242
ROBUST-BOX WIDTH 120, Vers. IIproduct added to your list
light grey RAL 7035
240x120x90mm
C2116161
ROBUST-BOX WIDTH 160, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2116161
ROBUST-BOX WIDTH 160, Vers. Iproduct added to your list
light grey RAL 7035
160x160x90mm
C2116162
ROBUST-BOX WIDTH 160, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2116162
ROBUST-BOX WIDTH 160, Vers. IIproduct added to your list
light grey RAL 7035
160x160x90mm
C2116241
ROBUST-BOX WIDTH 160, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2116241
ROBUST-BOX WIDTH 160, Vers. Iproduct added to your list
light grey RAL 7035
240x160x90mm
C2116242
ROBUST-BOX WIDTH 160, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2116242
ROBUST-BOX WIDTH 160, Vers. IIproduct added to your list
light grey RAL 7035
240x160x90mm
C2120301
ROBUST-BOX WIDTH 200, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2120301
ROBUST-BOX WIDTH 200, Vers. Iproduct added to your list
light grey RAL 7035
300x200x80mm
C2121201
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2121201
Case shell 120, with tongueproduct added to your list
light grey RAL 7035
120x120x60mm
C2121202
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2121202
Case shell 120, with tongueproduct added to your list
light grey RAL 7035
120x120x60mm
C2122001
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2122001
Case shell 120, with tongueproduct added to your list
light grey RAL 7035
200x120x60mm
C2122002
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2122002
Case shell 120, with tongueproduct added to your list
light grey RAL 7035
200x120x60mm
C2122401
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2122401
Case shell 120, with tongueproduct added to your list
light grey RAL 7035
240x120x60mm
C2122402
Case shell 120, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2122402
Case shell 120, with tongueproduct added to your list
light grey RAL 7035
240x120x60mm
C2124361
ROBUST-BOX WIDTH 240, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2124361
ROBUST-BOX WIDTH 240, Vers. Iproduct added to your list
light grey RAL 7035
360x240x80mm
C2161601
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2161601
Case shell 160, with tongueproduct added to your list
light grey RAL 7035
160x160x60mm
C2161602
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2161602
Case shell 160, with tongueproduct added to your list
light grey RAL 7035
160x160x60mm
C2162401
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2162401
Case shell 160, with tongueproduct added to your list
light grey RAL 7035
240x160x60mm
C2162402
Case shell 160, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C2162402
Case shell 160, with tongueproduct added to your list
light grey RAL 7035
240x160x60mm
C2203001
Case shell 200, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2203001
Case shell 200, with grooveproduct added to your list
light grey RAL 7035
300x200x40mm
C2243601
Case shell 240, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C2243601
Case shell 240, with grooveproduct added to your list
light grey RAL 7035
360x240x40mm
C2416241
ROBUST-BOX WIDTH 160, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2416241
ROBUST-BOX WIDTH 160, Vers. Iproduct added to your list
light grey RAL 7035
240x160x120mm
C2416242
ROBUST-BOX WIDTH 160, Vers. II
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2416242
ROBUST-BOX WIDTH 160, Vers. IIproduct added to your list
light grey RAL 7035
240x160x120mm
C2420301
ROBUST-BOX WIDTH 200, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2420301
ROBUST-BOX WIDTH 200, Vers. Iproduct added to your list
light grey RAL 7035
300x200x120mm
C2424361
ROBUST-BOX WIDTH 240, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2424361
ROBUST-BOX WIDTH 240, Vers. Iproduct added to your list
light grey RAL 7035
360x240x120mm
C2520301
ROBUST-BOX WIDTH 200, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Lid fixing outside of sealed area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2520301
ROBUST-BOX WIDTH 200, Vers. Iproduct added to your list
light grey RAL 7035
300x200x160mm
C2524361
ROBUST-BOX WIDTH 240, Vers. I
Robust plastic enclosure, ideal for electrical and electronic applications. Case shells either usable as top or base part. Each case part contains threads and fixing towers. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for use of membrane keyboards.
Supply 2 case shells with sealing, cover strips top and bottom, assembly kit
C2524361
ROBUST-BOX WIDTH 240, Vers. Iproduct added to your list
light grey RAL 7035
360x240x160mm
C3006061
SNAPTEC 60 x 60
Top and base parts are fitted together using a unique snap-in machanism. Fixing towers in top and base part. Recessed area for membrane keyboards. Simple, invisible wall-mounting in pre-moulded shafts within the base part.
Supply 1 top and base part with sealing, cover for the locking openings, dismantling key
C3006061
SNAPTEC 60 x 60product added to your list
light grey RAL 7035
60x60x40mm
C3006101
SNAPTEC 60 x 100
Top and base parts are fitted together using a unique snap-in machanism. Fixing towers in top and base part. Recessed area for membrane keyboards. Simple, invisible wall-mounting in pre-moulded shafts within the base part.
Supply 1 top and base part with sealing, covers for the locking openings, dismantling key
C3006101
SNAPTEC 60 x 100product added to your list
light grey RAL 7035
60x100x40mm
C3010101
SNAPTEC 100 x 100
Top and base parts are fitted together using a unique snap-in machanism. Fixing towers in top and base part. Recessed area for membrane keyboards. Simple, invisible wall-mounting in pre-moulded shafts within the base part.
Supply 1 top and base part with sealing, covers for the locking openings, dismantling key
C3010101
SNAPTEC 100 x 100product added to your list
light grey RAL 7035
100x100x80mm
C3162401
Case shell 160, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C3162401
Case shell 160, with grooveproduct added to your list
light grey RAL 7035
240x160x60mm
C3162402
Case shell 160, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C3162402
Case shell 160, with grooveproduct added to your list
light grey RAL 7035
240x160x60mm
C4203001
Case shell 200, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C4203001
Case shell 200, with tongueproduct added to your list
light grey RAL 7035
300x200x80mm
C4243601
Case shell 240, with tongue
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with tongue
C4243601
Case shell 240, with tongueproduct added to your list
light grey RAL 7035
360x240x80mm
C5203001
Case shell 200, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C5203001
Case shell 200, with grooveproduct added to your list
light grey RAL 7035
300x200x80mm
C5243601
Case shell 240, with groove
Case shell with thread and fixing towers as separate part. Alternative use either as top or bottom part. Screw fixing outside of the sealing area. Recess of approx. 0.8 mm for the use of membrane keyboards. Each 1 part with tongue and 1 part with groove needed for 1 case.
Supply 1 case shell with groove
C5243601
Case shell 240, with grooveproduct added to your list
light grey RAL 7035
360x240x80mm
C6009121
SMART-BOX WIDTH 90
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6009121
SMART-BOX WIDTH 90product added to your list
light grey RAL 7035
120x90x50mm
C6009161
SMART-BOX WIDTH 90
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6009161
SMART-BOX WIDTH 90product added to your list
light grey RAL 7035
160x90x50mm
C6011141
SMART-BOX WIDTH 110
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6011141
SMART-BOX WIDTH 110product added to your list
light grey RAL 7035
140x110x60mm
C6011201
SMART-BOX WIDTH 110
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6011201
SMART-BOX WIDTH 110product added to your list
light grey RAL 7035
200x110x60mm
C6013161
SMART-BOX WIDTH 130
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6013161
SMART-BOX WIDTH 130product added to your list
light grey RAL 7035
160x130x60mm
C6013221
SMART-BOX WIDTH 130
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6013221
SMART-BOX WIDTH 130product added to your list
light grey RAL 7035
220x130x60mm
C6015181
SMART-BOX WIDTH 150
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Recessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims (hinged), assembly kit incl. cover retention
C6015181
SMART-BOX WIDTH 150product added to your list
light grey RAL 7035
180x150x60mm
C6017281
SMART-BOX WIDTH 170
Four-part plastic enclosure, ideal for design orientated electrical and electronic applications. The sealing is already prefitted in the top. Screw fixing outside of the sealing area. Resessed operating area to protect the membrane keyboard. Fastening pillars for PCBs and DIN-rails.
Supply 1 base and top part with sealing, 2 trims, 1 assembly kit incl. cover retention
C6017281
SMART-BOX WIDTH 170product added to your list
light grey RAL 7035
280x170x60mm
C7008011
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7008011
IN-BOXproduct added to your list
light grey RAL 7035
84x82x55mm
, ,
C7008012
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7008012
IN-BOXproduct added to your list
light grey RAL 7035
84x82x55mm
, ,
C7008014
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7008014
IN-BOXproduct added to your list
light grey RAL 7035
84x82x55mm
, ,
C7008015
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7008015
IN-BOXproduct added to your list
light grey RAL 7035
84x82x55mm
, ,
C7008021
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7008021
IN-BOXproduct added to your list
light grey RAL 7035
84x82x85mm
, ,
C7008024
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7008024
IN-BOXproduct added to your list
light grey RAL 7035
84x82x85mm
, ,
C7008025
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7008025
IN-BOXproduct added to your list
light grey RAL 7035
84x82x85mm
, ,
C7012011
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7012011
IN-BOXproduct added to your list
light grey RAL 7035
122x82x55mm
, ,
C7012012
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7012012
IN-BOXproduct added to your list
light grey RAL 7035
122x82x55mm
, ,
C7012014
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7012014
IN-BOXproduct added to your list
light grey RAL 7035
122x82x55mm
, ,
C7012015
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7012015
IN-BOXproduct added to your list
light grey RAL 7035
122x82x55mm
, ,
C7012021
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7012021
IN-BOXproduct added to your list
light grey RAL 7035
122x82x85mm
, ,
C7012024
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7012024
IN-BOXproduct added to your list
light grey RAL 7035
122x82x85mm
, ,
C7012025
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7012025
IN-BOXproduct added to your list
light grey RAL 7035
122x82x85mm
, ,
C7013031
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7013031
IN-BOXproduct added to your list
light grey RAL 7035
124x122x55mm
, ,
C7013032
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7013032
IN-BOXproduct added to your list
light grey RAL 7035
124x122x55mm
, ,
C7013034
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7013034
IN-BOXproduct added to your list
light grey RAL 7035
124x122x55mm
, ,
C7013035
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7013035
IN-BOXproduct added to your list
light grey RAL 7035
124x122x55mm
, ,
C7013051
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7013051
IN-BOXproduct added to your list
light grey RAL 7035
124x122x85mm
, ,
C7013054
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7013054
IN-BOXproduct added to your list
light grey RAL 7035
124x122x85mm
, ,
C7013055
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7013055
IN-BOXproduct added to your list
light grey RAL 7035
124x122x85mm
, ,
C7016011
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7016011
IN-BOXproduct added to your list
light grey RAL 7035
162x82x55mm
, ,
C7016012
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7016012
IN-BOXproduct added to your list
light grey RAL 7035
162x82x55mm
, ,
C7016014
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7016014
IN-BOXproduct added to your list
light grey RAL 7035
162x82x55mm
, ,
C7016015
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7016015
IN-BOXproduct added to your list
light grey RAL 7035
162x82x55mm
, ,
C7016021
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7016021
IN-BOXproduct added to your list
light grey RAL 7035
162x82x85mm
, ,
C7016024
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7016024
IN-BOXproduct added to your list
light grey RAL 7035
162x82x85mm
, ,
C7016025
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7016025
IN-BOXproduct added to your list
light grey RAL 7035
162x82x85mm
, ,
C7016061
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7016061
IN-BOXproduct added to your list
light grey RAL 7035
162x122x90mm
, ,
C7016062
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7016062
IN-BOXproduct added to your list
light grey RAL 7035
162x122x90mm
, ,
C7016064
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7016064
IN-BOXproduct added to your list
light grey RAL 7035
162x122x90mm
, ,
C7016065
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7016065
IN-BOXproduct added to your list
light grey RAL 7035
162x122x90mm
, ,
C7020041
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7020041
IN-BOXproduct added to your list
light grey RAL 7035
202x122x75mm
, ,
C7020042
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7020042
IN-BOXproduct added to your list
light grey RAL 7035
202x122x75mm
, ,
C7020044
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7020044
IN-BOXproduct added to your list
transparent
202x122x75mm
, ,
C7020045
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7020045
IN-BOXproduct added to your list
transparent
202x122x75mm
, ,
C7020061
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7020061
IN-BOXproduct added to your list
light grey RAL 7035
202x122x90mm
, ,
C7020064
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7020064
IN-BOXproduct added to your list
light grey RAL 7035
202x122x90mm
, ,
C7020065
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7020065
IN-BOXproduct added to your list
light grey RAL 7035
202x122x90mm
, ,
C7021071
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7021071
IN-BOXproduct added to your list
light grey RAL 7035
202x152x90mm
, ,
C7021072
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7021072
IN-BOXproduct added to your list
light grey RAL 7035
202x152x90mm
, ,
C7021074
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7021074
IN-BOXproduct added to your list
light grey RAL 7035
202x152x90mm
, ,
C7021075
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7021075
IN-BOXproduct added to your list
light grey RAL 7035
202x152x90mm
, ,
C7025081
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7025081
IN-BOXproduct added to your list
light grey RAL 7035
252x162x90mm
, ,
C7025082
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7025082
IN-BOXproduct added to your list
light grey RAL 7035
252x162x90mm
, ,
C7025084
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7025084
IN-BOXproduct added to your list
light grey RAL 7035
252x162x90mm
, ,
C7025085
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7025085
IN-BOXproduct added to your list
light grey RAL 7035
252x162x90mm
, ,
C7025091
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7025091
IN-BOXproduct added to your list
light grey RAL 7035
252x162x120mm
, ,
C7025094
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7025094
IN-BOXproduct added to your list
light grey RAL 7035
252x162x120mm
, ,
C7025095
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7025095
IN-BOXproduct added to your list
light grey RAL 7035
252x162x120mm
, ,
C7030101
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7030101
IN-BOXproduct added to your list
light grey RAL 7035
302x232x90mm
, ,
C7030102
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7030102
IN-BOXproduct added to your list
light grey RAL 7035
302x232x90mm
, ,
C7030104
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7030104
IN-BOXproduct added to your list
light grey RAL 7035
302x232x90mm
, ,
C7030105
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7030105
IN-BOXproduct added to your list
light grey RAL 7035
302x232x90mm
, ,
C7030111
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7030111
IN-BOXproduct added to your list
light grey RAL 7035
302x232x110mm
, ,
C7030112
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7030112
IN-BOXproduct added to your list
light grey RAL 7035
302x232x110mm
, ,
C7030114
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7030114
IN-BOXproduct added to your list
light grey RAL 7035
302x232x110mm
, ,
C7030115
IN-BOX
Two-piece plastic enclosure with sealing foamed into the top part. Recessed panel to protect membrane keyboards and design foils. Attachment domes for DIN rails, PCBs and mounting plates. Rational stainless steel quick-action lock outside the sealing area.
Supply 1 bottom and top part each with sealing, assembly kit incl. cover retention and 4 self-tapping screws for installation configuration
C7030115
IN-BOXproduct added to your list
light grey RAL 7035
302x232x110mm
, ,
Material
Protection class
Colour
light grey RAL 7035
Standards
The degree(s) of protection listed refer to the empty standard enclosures (without any modifications) and are in compliance with the EN 60529 standard.
Please take the dimensions from current parts. These are subject to material- and manufacturing-specific tolerances.
Weight/1 part
4 g
Customs tariff number
(OKW product)
(OKW product)
39269097
Country of manufacture
Germany